Sprinkler System Solutions

TA Banner Corrosion

FIRE SPRINKLER MAINTENANCE BENEFITS from PIPE FREEZING TECHNOLOGY

Automatic sprinkler systems are used more than any other fixed fire protection system and the global fire sprinkler market is expected to reach $11.04 billion by 2020. The annual market growth is estimated at 9.36% between 2015 and 2020 with over 40 million sprinklers fitted worldwide each year.

Leggi tutto...

Corrosion

TA Banner CorrosionSynopsis

During heat treatment surface oxide layers, usually called heat tints, are formed on precipitation-hardening nickel-based alloys like UNS N07718. These oxide layers are composed of elements that have been selectively oxidised from the base metal, principally nickel, chromium and iron.

The same phenomenon has been intensively studied on austenitic stainless steels. It is well known that the region beneath the oxide layer is depleted in one or more of the elements that are involved in the scale formation.

Leggi tutto...

The Future for WAAM

CS Banner International success with weld purging of titanium alloy pipeAn acronym for Wire Arc Additive Manufacturing, WAAM is one of several prominent 3-D printing techniques where significant advances have been made in the last five years. Already established as an alternative production process in the airframe industry WAAM is now making an impact in other manufacturing sectors.

Already attracting massive investment across the world, a recent estimate of from the International Data Corporation indicates that global spending on 3-D printing will grow to $23.0 billion by 2022. This is an increase of over 23% from 2018. China, the UK and the USA spearhead the drive to exploit the potential for 3-D printing but Australia, India and the rest of Europe are also actively examining applications.

Leggi tutto...

International success with weld purging of titanium alloy pipe - CS 417

CS Banner International success with weld purging of titanium alloy pipe

A new facility for the production of 1.25 million tonnes of terepthalic acid (PTA) has been built at the port of Mangalore in the Indian state of Karnataka 1.

The project involved factory fabrication of specialised equipment followed by integration on site. A range of stainless steels were used in manufacture along with titanium and tantalum alloys. The bulk of the fabrication involved welding of tubes and pipes.

A significant part of the project was awarded to a Chennai based customer of Weldwell Speciality Pvt Ltd 2 in Mumbai, a major supplier to the Indian welding industry for over two decades. The customer has a long tradition of specialist fabrication of titanium, tantalum, zirconium and nickel alloys and stainless steels.

Leggi tutto...

Mechanical Weld Backing Methods - TP 1063

mechanical backing weld tape equipment

Mechanical weld backing methods for overcoming weld skill limitations

For most applications of fusion welded joints, it is unnecessary to go to the trouble and expense of ensuring fully continuous transition of metal between parent materials. The fillet weld and the partial penetration butt weld usually are adequate, employed intelligently, they can meet many structural requirements.

Leggi tutto...

Major Advances in Weld Purge Technology - TP 1062

mechanical backing weld tape equipment

Few would disagree with the fact that making high quality welds demands skill. Most metallurgical obstacles have been overcome through progressive development of filler materials. Contemporary equipment for use in GTAW and GMAW is probably as good as it is likely to get. Of the few difficulties remaining, the production of sound and oxide-free weld underbeads is arguably the most underestimated.

Leggi tutto...

Keeping it Clean - TP 1061

TP Banner Keeping it Clean

Keeping it Clean

Argweld® Flexible Weld Purging Enclosures® make it possible to weld stainless steels, titanium and other reactive alloys effectively without oxidation & discolouration.

Leggi tutto...

Innovation in Weld Protection - TP 1060

TP-Banner-Innovation-in-Weld-Protection-WEB

Innovation in Weld Protection

The last fifty years has witnessed unprecedented development in welding technology. Major advances in metallurgy resulted in the introduction of new alloys capable of meeting the increasing demands for high strength performance.

Leggi tutto...

Weld Purging for Tubes and Pipes

TP Banner Weld Purging for Tubes and Pipes

Purging for Tubes and Pipes for Improving your Technique

High quality welds in pipes and tubes can only be assured if the weld underbead is protected from oxidation. The various techniques available through which protection can be given is referred to as purging.

Leggi tutto...

Inert Gas Purging with Orbital Welding

inert gas purging with orbital welding

Inert Gas Purging with Orbital Welding - World Pipelines & Global Energy

It is often difficult to meet requirements for quality using manual welding. Orbital welding has become an essential process with many tube and pipe fabrications since modern equipment can be fully automatic and reliable and offers repeatable results.

Leggi tutto...

Performance of TIG Electrodes

performance of gig welding tungsten electrodes

By P C J Anderson at The Welding Institute - Technical Paper Report Nº 220177193

Performance of TIG Electrodes (incorporating MultiStrike® Tungstens)

The increased use of mechanised and fully automated TIG welding techniques has highlighted the demand for improved performance from the tungsten electrode.

Leggi tutto...

Purging Methods for Weld Purity

purging methods purity weld

By Dr Michael Fletcher of Delta Consultants 

Design, fabrication, and maintenance practices that can meet exacting purity requirements of ASME 31.3 are crucial to the food, pharmaceutical, and semiconductor industries.

Demands for improvements in piping fabrication quality have risen exponentially in recent years.

Leggi tutto...

Optimizing Tungsten Electrode Performance

TP Banner Optimizing Tungsten Electrode Performance

Proper preparation can lead to an increase in electrode life and better welds. Optimizing Tungsten Electrode Performance.

While hand grinding can be tolerated in some circumstances, producing welds for safety-critical applications and where weld properties must meet stringent inspection criteria needs a more controlled approach. Following are some tips for optimizing electrode preparation, which can lead to a significant increase in electrode life.

Leggi tutto...