Improve weld quality with precision ground Tungsten Electrodes using non-radiotoxic MultiStrikes® and The TEG-1000 Tungsten Electrode Grinder.
Back by popular demand, Huntingdon Fusion Techniques HFT® have re-initiated the manufacturing of the famous TEG-2 Tungsten Electrode Grinder, under the new name of TEG-1000.
Ron Sewell, Chairman for HFT® said: “Ensuring your Tungsten Electrodes are sharpened correctly can help to improve weld quality. Tungsten Electrode Grinders are a convenient, safer and more accurate way than other methods of grinding Tungsten Electrodes.”
“Grinding thoriated Tungsten Electrodes with open air belt and disc grinding tools for example can be extra hazardous not only for safety, but also for personal health. To overcome these conditions, whilst maintaining a very high life expectancy for the Tungsten Electrode we manufacture blue-tipped MultiStrike® Tungsten Electrodes that contain non-radioactive rare earth elements, eliminating the risk to health posed by red tipped radiotoxic thoriated Tungsten Electrodes.”
Other Tungsten Electrodes work at higher temperatures so their oxide additions (mostly radioactive) burn out, or evaporate much faster than those non-radioactive ingredients in MultiStrike®, so much so that MultiStrikes® give at least 10 times more arc striking capacity over other Tungsten Electrodes, when tested under the same conditions.
MultiStrikes® can be used for welding aluminium with the AC process, as well as steels and alloys with the DC process, which allows the welder to have just one type of Tungsten Electrode to weld all materials and reduce the amount of stocks and purchasing requisitions.
The use of the TEG-1000 Grinder with HFT®’s well established and technically popular MultiStrike® Tungsten Electrodes will give repeatable Tungsten Electrode points every time, enabling consistent repeatable arc performance and welding results. Sizes 1.0 to 3.2 mm can be ground as standard, with other sizes catered for on request.
Savings can be achieved because of the increased life of properly ground Tungsten Electrodes. With the special collet accessory on the TEG-1000, shorter Tungsten Electrodes can be held, significantly increasing the length of life of each Tungsten Electrode before it is discarded.
Repeatable high quality TIG welding requires Tungsten Electrodes to have perfectly ground and polished tips. HFT®’s TEG-1000 provides these, time after time, to exactly the same size and shape. The diamond wheel grinds the Tungsten Electrodes longitudinally, preventing arc flicker or wander caused by circumferential lines or ridges found on electrodes, which have been ground incorrectly.
Huntingdon Fusion Techniques HFT® have a Worldwide Exclusive Distributor network.
This Press Release is Succesfully Published in Worldwide Magazines, by clicking the logo you can read the article:
|Read the published article directly in the magazine International Tube Association
|Read the published article directly in the magazine TubeFirst
|Read the published article directly in the magazine World Pipelines
|Read the published article directly in the magazine Wire and Tube News
|Read the published article directly in the magazine ThomasNet
|Read the published article directly in the magazine Tube News