High Quality Feed Hose for Inert Gas Supply

Argon gas hose, gas hose, argon delivery, heat resistant covers, pipe purging

Using a high quality gas welding hose will ensure a leak tight method of feeding non-contaminated gas into the welding zone for weld purging.

Continuing their pursuit to advance in Weld Purging Technology, Huntingdon Fusion Techniques HFT® now manufacture tailor made Inert Gas Feed Hose assemblies with leak tight fittings and a low outgassing rate.

Luke Keane, Technical Sales Manager for HFT® said: “It is important when welding all reactive metals that the welding zone is purged of oxygen, even down to as low as 20 parts per million (ppm). Our Inert Gas Feed Hose assemblies are the best way of transporting argon, helium and other inert gasses to the welding zone where a guaranteed leak tight, non contaminated delivery is required.”

“All of our products are made to the highest quality and standard and are the best available for argon and helium gas use.”

The special low outgassing rate rubber feed hose comes complete with a regulator, which directly connects to any range of Inflatable Tube and Pipe Weld Purging Systems at one end and to the gas source at the other. Regulators can be changed or eliminated.

A selection of leak tight adaptors is provided for attaching the inert gas regulator whilst the pre-fitted other end joins up with all HFT® Argweld® Pipe Weld Purging Systems. All of these high quality fittings will eliminate welding connection difficulties that welders might experience on site.

The Inert Gas Feed Hoses can also be supplied to all other TIG / GTAW welders as well as laser operators with their own special fittings as required. The hoses are available off the shelf in a standard range of lengths, 30 m, 25 m, 20 m, 15 m, 10 m and 5 m, with special made hoses made to order.

Conforming to British Standard BS EWN 599 Quality Standard, the Inert Gas Feed Hoses each have a temperature range from -30º up to 80ºC and a safety factor of three times working pressure 20 bar (300 psi).

In the event of operators working in high temperature conditions as for heat-treated chrome steel pipework for example, special high temperature resistant hoses are available, complete with special heat resistant fittings.

HFT® advises welders and laser operators to only use top quality hose assemblies to feed inert gas for top quality welds!

inert gas hose, argon feed, pipe purging, huntingdon, huntingdon fusion argon gas hose, gas hose, argon delivery, heat resistant covers, pipe purging

 

Huntingdon Fusion Techniques HFT® have a Worldwide Exclusive Distributor Network.

More information


 

This Press Release is Succesfully Published in Worldwide Magazines, by clicking the logo you can read the article: 

 Logo OilVoice  Read the published article directly in the magazine OilVoice
 Logo The Fabricator  Read the published article directly in the magazine The Fabricator
 

 


Huntingdon Fusion Techniques HFT® are proud members of:

American Welding Society International Tube Association The Welding Institue Welding World


You are not allowed to use or copy any of this material or content without the written permission of Huntingdon Fusion Techniques HFT®, copyright protected. All rights belong to Huntingdon Fusion Techniques HFT® exclusively. Not for any reproduction without consent.