Family Range of Auxiliaries for PurgEye® Weld Purge Monitors®

PurgeNet™ Dew Point Purging Gas Moisture Sensor™

Measurement of the Dew Point Moisture levels in Purging Gas for Critical WeldsMeasurement of the Dew Point Moisture levels in Purging Gas for Critical Welds has never been easier than with the revolutionary HFT® PurgeNet™ Dew Point Purging Gas Moisture Sensor™.

Designed to integrate with any of our 1 ppm PurgEye® Weld Purge Monitors® this device now means that Companies making critical joints, no longer need to purchase a separate, expensive, Dew Point Meter.

Weld Purge Monitors® invented by HFT® in the 1970’s. Registered Trademarks in USA and Europe.


Use the link below for technical details:

PurgeNet™ Dew Point Purging Gas Moisture Sensor™ 





PurgeNet™ Smart Cable

PurgeNet Smart Cable Purge MonirosRevolutionary PurgeNet™ Smart Cable is designed to interface with the Argweld® Family Range of PurgEye® Weld Purge Monitors®.

Connect it together with all smart accessories for weld purging, including the PurgeAlarm™ Traffic Light System below, which gives a visual warning during welding in case of rising or falling oxygen levels or even to charge your Weld Purge Monitor®.  

PurgeNet™ Smart Cable can also be used in conjunction with PurgeLog™ software to transfer weld purge data to a PC for quality control purposes (see below).


Use the link below for technical details:

PurgeNet™ Smart Cable





PurgeAlarm Visual Alarm Indicator™

PurgEye 100 Weld Purge Monitor IP65 Hand Held Oxygen Monitor Gas Analyser AnalyzerThe PurgeAlarm™ Visual Alarm Indicator PNA-02 is an IP66 rated industrial traffic light style column to convey the alarm status of your PurgEye® Weld Purge Monitor®™. Can be fitted with single red light (stop) or green (go) and red light combination.

Use the link below for technical details:

PurgeAlarm™ Visual Alarm Indicator™










PurgeLog™ Data Logging Software

PurgeLog Data Logging SoftwareData Logging Software, PurgeLog™, is standard on all high spec HFT® PurgEye® Weld Purge Monitors measuring down to 1 ppm. 

Easy transfer of data.  Quality Control documentation and Weld Certifications using our unique PurgeLog™ software.
Software is supplied on USB data stick for easy installation to Windows based PC. Purge data can be transferred to PC using the PurgeNet lead and has the option of being imported into a spreadsheet for further manipulation.

Use the link below for technical details:

PurgeLog™ Data Logging Software







PurgeNet™ Automatic Machine Interface Lead

PurgeNet PurgEye Argweld Weld Purge Monitors Machine Interface Automatic Oxygen AnalysersThe PurgeNet™ Automatic Machine Interface Lead provides clever control of your PPM readings with Welding Power Sources.  

Used for communicating the current oxygen reading from your PurgEye® Weld Purge Monitor® to another piece of equipment, such as a Welding Power Source.

PurgeNet™ Machine Interface Lead allows a minimum PPM level to be set on the Weld Purge Monitor® by the user, in accordance with the welding parameter, and if during the weld, the oxygen content in the purge gas falls to this, the welding power source automatically switches off, pausing the welding process until the PPM level has risen again.

Use the link below for technical details:

PurgeNet™ Machine Interface to suit 10 ppm PurgEye® Weld Purge Monitor® Range



Click here to send us a message

COMPARE ALL WELD PURGE MONITORS IN THE FAMILY RANGE

CONTACT US – SEE OUR WORLDWIDE OFFICES