Techweld® MultiStrike® Tungsten Electrode Grinders TEG-1000

  • Product
  • Overview
  • Key Features
  • Specification
  • FAQ
  • Ordering
  • Downloads
  • Gallery

TEG-1000 with Diamond Wheel for Grinding any Tungsten Electrode!

Back by popular demand, Huntingdon Fusion Techniques HFT® have re-designed the TEG-3 and manufactured the 'NEW' TEG-1000 Tungsten Electrode Grinder.

Ensuring your Tungsten Electrode is sharpened correctly using the TEG-1000 is a more convenient, safer and accurate way than other methods of grinding Tungsten Electrodes.

Techweld Tungsten Electrode Grinder TEG1000 TEG3 MultiStrikes Multi Strike Thoriated Tungstens Welding Rods

 

Contact us - See our Worldwide Offices

Read More

Eliminate Arc Flicker and Wander

Techweld Tungsten Electrode Grinder TEG1000 TEG3 MultiStrikes Multi Strike Thoriated Tungstens Welding Rods

The Techweld® MultiStrike® Tungsten Electrode Grinder TEG-1000 is a much-upgraded version from the old models TEG-2 and TEG-3 now with a totally enclosed motor.

The TEG-1000 will give repeatable Tungsten Electrode points every time, enabling consistent repeatable arc performance and welding results. Sizes 1.0 to 3.2 mm can be ground as standard, with other sizes catered for with an easy collet change available as an accessory.

With Tungsten Electrodes ground and polished, mechanised welding can produce identical, repeatable results every time. Through manual welding, the shape of the Tungsten Electrode is just as important. A correctly shaped tip can ensure the arc is precisely positioned with none of the preferential arcing experienced when using poorly shaped manually ground tips.

By grinding the points longitudinally, the TEG-1000 Tungsten Electrode Grinder eliminates arc flicker or wander.

Savings can be achieved because of the increased life of properly ground Tungsten Electrodes. With the special collect accessory, shorter tungstens can be held, significantly increasing the length of life of each Tungsten Electrode before it is discarded.

 

Contact us - See our Worldwide Offices

Read More

TEG-1000 Providing Stable Arc Performance

Techweld Tungsten Electrode Grinder TEG1000 TEG3 MultiStrikes Multi Strike Thoriated Tungstens Welding Rods

Key features of the Techweld® Multi-Strike® Tungsten Electrode Grinder model TEG-1000 include:

  • British manufacture.
  • Long life Diamond Wheel.
  • Quiet in operation.
  • Totally enclosed Motor.
  • Individual on/off switches.
  • Accessible for safety.
  • CE Mark.
  • 110 Volt and 220 Volt versions 50/60 Hz.
  • Easy wheel replacement.
  • Can be retro-fitted to an extraction system.
  • Bench mounted.
  • Easy to use collet and angle guide system.
  • Integral handle making unit portable and easy to move about in the workshop.
  • A published technical paper is available about tungsten electrode grinding, a copy of which is available on request.

Long Life Diamond Grinding Wheels

Tungsten Electrode Grinders 'Long Life' Diamond Grinding Wheels for our 'unique' models TEG-2 and TEG-3 continue to be available as replacements.  

The wheel on the 'New' TEG-1000 updated model is the same.

HFT® Grinding Wheels were specifically developed by HFT® to produce long lasting and long life results. We continue to have availability of Replacement 'Long Life' Diamond Grinding Wheels.

Huntingdon Fusion Techniques HFT® pioneered the use of Tungsten Electrode Grinding machines in the 1970's because of our knowledge behind the science of the welding arc and the need for a consistently and correctly ground tungsten electrode.

These Replacement 'Long Life' Diamond Grinding Wheels are available for immediate delivery and will always be available to all our customers via ourselves and our Worldwide Distributor Network.

 

Contact us - See our Worldwide Offices

Read More

Perfectly Ground and Polished Tips, Time and Time Again

Techweld Tungsten Electrode Grinder TEG1000 TEG3 MultiStrikes Multi Strike Thoriated Tungstens Welding Rods

The Techweld® MultiStrike® Tungsten Electrode Grinder model TEG-1000 has been specifically designed and manufactured for the job. The cost saved in grinding wheels alone can provide rapid payback on the small outlay required to purchase the grinder.

Ensuring your Tungsten Electrode is sharpened correctly can help improve weld quality. The TEG-1000 ensures TIG welding Tungsten Electrodes have perfectly ground and polished tips.

The diamond wheel grinds the Tungsten Electrodes longitudinally, preventing arc flicker.

Replacement wheels fit all models, the TEG2, TEG-3 and the TEG-1000.

With a correctly shaped tip, the arc can be precisely positioned with none of the preferential arcing experienced when using poorly shaped manually ground tips.

 

Contact us - See our Worldwide Offices

Read More

Techweld® MutliStrike® Tungsten Grinder Frequently Asked Questions

Techweld Tungsten Electrode Grinder TEG1000 TEG3 MultiStrikes Multi Strike Thoriated Tungstens Welding Rods

1.0 What is the purpose of the TEG-1000?

The TEG-1000 Tungsten Electrode Grinder is a low cost, fast return on investment tool, that will grind repeatable Tungsten Electrode points every time, to exactly the same size, surface finish and shape at a low cost.

2.0 What size Tungsten Electrodes can the TEG-1000 be used for?

Sizes from 1.0 to 3.2 mm can be ground with the tappet provided. Other sizes and short lengths can be ground with the individual collet sets as required.

3.0 Why does the TEG-1000 require a diamond wheel?

The diamond wheel grinds the Tungsten Electrodes’ longitudinally and with a much smoother finish than other types of wheels. This prevents arc flicker or wander caused by circumferential lines or ridges found on Tungsten Electrodes, which have been ground incorrectly.

4.0 Can the diamond wheels be fitted to other grinders as replacements?

Our standard diamond wheels will fit both the TEG-3 and the TEG-1000 Tungsten Electrode Grinders.

5.0 What is the return on investment?

The cost saved in grinding materials alone can provide rapid payback for the TEG-1000 Tungsten Electrode Grinder. In addition because of the softer way that electrodes can be ground on the TEG-1000 with the diamond wheel, the electrodes are not overheated as they can be with other grinding methods and materials, so they do not split, thus saving on wastage of electrodes. Using the Collet/Pin Vice accessory, short lengths can be ground, whereas welders tend to discard 50% of the length of each tungsten as they become too short to hold for normal manual grinding methods. The diamond wheels last many times longer than the ‘soft’ silicon carbide wheels.

6.0 Where can I purchase the TEG-1000.

Please visit our website, where you can obtain information about our Worldwide Offices to locate your nearest Exclusive Distributor.

7.0 What Tungsten Electrode would you recommend for the TEG-1000?

The TEG-1000 will grind all standard Tungsten Electrodes for TIG/GTAW, Plasma/PAW and resistance welding. We highly recommend MultiStrike® Tungsten Electrodes which, to our knowledge, are the only fully traceable tungstens available. They have no radiotoxic thoria that the red tipped tungsten electrodes have. When used in automatic and manual welding processes, operators experience less down time and can achieve full weld penetration with less heat input and up to ten times greater arc striking before re-grinding is necessary.

 

Contact us - See our Worldwide Offices

Read More

Shipping Information, Weights and Dimensions

Techweld Tungsten Electrode Grinder TEG1000 TEG3 MultiStrikes Multi Strike Thoriated Tungstens Welding Rods

Customs Tariff

European Customs Tariff: 8508 7000
International Customs Tariff: 8460 90 8080
United States Customs Tariff: 8460 90 8080
Canada Customs Tariff: 8460 90 8080

Product Codes and Sizes

TEGS001 Replacement Diamond Grinding Wheels 'Long Life' for Techweld® Tungsten Electrode Grinder are for all models TEG-2TEG-3 and the latest all enclosed motor TEG-1000.

Techweld® MultiStrike® Tungsten Electrode Grinders are available in both voltages 110V and 22V.

In stock and available for immediate delivery.

Order today!  We ship today!

  

Techweld® MultiStrike® TEG-1000 Tungsten Electrode Grinder

PART Nº PRODUCT DESCRIPTION
TEG1000-110
TEG1000-220
Tungsten Electrode Grinder, 110 Volt
Tungsten Electrode Grinder, 220 Volt

Prices for Tungsten Electrode Grinder with extraction to follow shortly.


Long Life Diamond Grinding Wheel to suit all Models TEG-2, TEG-3 and 'New' TEG-1000

  PART Nº ACCESSORIES
TEGS001 Diamond grinding wheel (replacement), fits all unique HFT® models TEG-2, TEG-3 and TEG-1000



Accessories and Spares

  PART Nº ACCESSORIES
  TEGS002B

TEGS005

TEGS004

TEGS048
Multi-hole tappet

Collet set for short Tungstens

4.0 mm tappet

4.8 mm tappet


Accessories and Spares

  PART Nº ACCESSORIES
  TEGS003

TEGS006

TEGS007

TEGS008

TEGS009
Tappet block

Carry handle

Front perspex panel

Front cover with persplex

Dust tray

 

Contact us - See our Worldwide Offices

Read More

Items available as 'Downloads'

Techweld Tungsten Electrode Grinder TEG1000 TEG3 MultiStrikes Multi Strike Thoriated Tungstens Welding Rods


Leaflets and general sales material are available to everyone visiting our website.

Restricted access items are shown at the end of this Download section.

 

Techweld MultiStrikes® Tungsten Electrode GRINDER A4 Leaflet

Techweld MultiStrikes® Tungsten Electrode GRINDER TEG-3 A4 Flyer

Techweld MultiStrikes® Tungsten Electrode GRINDER TEG-3 FAQ

Techweld MultiStrikes® Tungsten Electrodes A4 Leaflet

Techweld MultiStrikes® Tungsten Electrodes A3 Technical Leaflet

Techweld MultiStrikes® Tungsten Electrodes Sales Flyer

Techweld MultiStrikes® Tungsten Electrodes Reasons to Use TEG-1000 Flyer

Techweld MultiStrikes® Tungsten Electrodes FAQ

TWI The Welding Institute Report - Performance of TIG Electrodes Technical Article

 

Special Note: The items below are restricted and only available in our Secure Login section.  This is mainly for the protection of our Exclusive Distributor network.
Should you wish to receive an item mentioned below which is not active as a 'download' link on this page, please contact us or your nearest Distributor.

Techweld MultiStrikes® User Instructions Technical Manual
Techweld MultiStrikes® User List Customer Reference
Techweld MultiStrikes® User List Customer Reference Aerospace Industry
Techweld MultiStrike® Material Safety Data Sheet MSDS
Techweld MultiStrikes® verses Thoriated Tungstens Material Safety Data Sheet MSDS
Techweld MultiStrikes® Certificate of Conformity Batch
Techweld MultiStrikes® Certificate of Conformity
Techweld MultiStrikes® Certificate COSHH
Techweld MultiStrikes® Certificate COSHH US
Techweld MultiStrikes® Health & Safety Report
Techweld MultiStrikes® Sample Pack Request
Techweld MultiStrikes® Technical Data Sheet TDS
Techweld MultiStrikes® Technical Notes
Techweld MultiStrikes® Training Poster
Techweld MultiStrikes® Price List

 

Contact us - See our Worldwide Offices

Read More