Argweld® PurgElite® Purge Bladders and Dams

  • Product
  • Overview
  • Key Features
  • Application
  • Specification
  • Compare
  • Product Reviews
  • FAQ
  • Ordering
  • Downloads
  • Videos
  • Gallery

Purge your Tubes and Pipes the 'Elite' way

Purging Systems, Purge Bladders and Purge Dams, using real scientific purge bladder breakthrough technology, Argweld® PurgElite® Inflatable Tube and Pipe Weld Purging Systems introduces to the market place for the first time a 'New' 1 inch (25 mm) System for small diameter tubes and pipes. Another great innovation to help tube and pipe welders save time, money, gas and achieve better welds. The volume to purge is kept small, resulting in savings in both time and cost of inert gas used. Purge bladders and dams suitable for high quality pristine tube and pipe weld purging, 1 to 24" (25 to 600 mm) diameters. For full technical information, use the tabs above.

PurgElite Tube and Pipe Purge Systems Purge Bladders Purging Dams

 

Return on Investment (ROI)

All Argweld® Pipe Weld Purging Systems and all PurgEye® Weld Purge Monitors® provide instant Return on Investment.

Read More...

 

Contact us - See our Worldwide Offices

Read More

'NEW' for 1 inch (25 mm)ø Tubes and Pipes

PurgElite Weld Purge Systems Purge Bladders Purging Dams

After 40 years of manufacturing expertise in the field of tube and pipe purge bladders and dams, Huntingdon Fusion Techniques brings to the market yet another great innovation to help tube and pipe welders save time, money, gas and achieve better welds.

This 5th Generation Innovative Advanced Design in the Argweld® range introduces for the first time a 1 inch (25 mm) System for small diameter tubes and pipes!

The Argweld® PurgElite® purge bladder and purge dam systems are suitable for high quality pristine weld purging of tubes to tubes or fittings and pipes to pipes and fittings for 1 to 24" (25 to 600 mm) diameter.

PurgElite Weld Purge Systems Purge Bladders Purging DamsThese even more advanced tandem dam based systems, with many unique features keep Huntingdon Fusion Techniques HFT® right at the forefront of technical innovation, by creating a simple, low cost solution to make high purity welds.

With the savings made due to this revolutionary new design, we have been able to reduce prices significantly whilst at the same time, manufacturing a technically superior product.

The volume to purge is kept small, resulting in savings in both time and cost of inert gas used.

Argweld® PurgElite® Inflatable Tube and Pipe Weld Purging Systems have two heavily protected purge bladders or dams connected by a new design inert gas purging tube.

The inert gas purges air as well as other unwanted gases and vapours out of the space between the dams with inert gas coming through a unique, much lower cost, simpler, more trouble free valve than used on other designs.

This 'new' design low profile valve allows us to manufacture a 1" (25 mm) Inflatable Tube and Pipe Purging System, which has never been achieved previously.

In addition, these systems have no raised metal parts making them ideal for use in a wide range of industries that would normally use internally polished stainless steel tubing and piping.

Standard sizes of Argweld® PurgElite® Inflatable Tube and Pipe Weld Purging Systems are available for immediate delivery and special requirements can be produced in just a few days.

Don't use old fashioned purge bladders or purge dams that burst and do not use homemade devices like cardboard, paper dams or foam bungs. They contain a lot of water, air and water vapour. Bad products put your weld at risk and end up costing you more money.

Use the proper tool for the job! An Argweld® PurgElite® Inflatable Tube and Pipe Weld Purge System.

 

Contact us - See our Worldwide Offices

Read More

Tandem Dam Based Systems in 1 to 24" (25 to 600 mm)

PurgElite Tube and Pipe Purge Systems, Purge Bladders and Dams

Argweld® PurgElite® Inflatable Tube and Pipe Weld Purge Systems simplify the process of inert gas purging and are quick and easy to install.

28W PurgEliteWeldPurgeSystems

Quick and easy to install

Quick fit couplings complete with "o" ring for gas tight sealing and stainless steel collet to hold the tube mechanically tight. Now fitted with "Anti-Release" circlip to prevent parts accidentally separating inside the pipe. 

Innovative purge gas feed device

No complicated valve to set.

Inflation of purge dams & inert gas purging with one line

No chance of inflatable purge bladders bursting due to over pressurisation. One hose from the inert gas supply is all that is needed.

Specially developed purge dam connection hose

Protection sleeve, resistant to hot metal up to 700ºC (1292ºF).

Synthetic spinal connection hose gives complete flexibility to go around bends.

Low vapour pressure material.

No scratching of internally polished surfaces.

For all grades of stainless and duplex steels, with and without polished interiors, titanium, zirconium and any other exotic metals or alloys.

Centrepiece Glow Positioning Indicator

Argweld® PurgElite® cost saving systems can be positioned accurately.

The glow strip positioning band in the centre of each system gives ease of use when positioning the device underneath the weld.

Size range: 1 - 24" (25 to 600 mm) Ø

PurgElite Tube and Pipe Purge Systems

No restrictions in elbows or bends in pipe work.

First inflatable 1" (25 mm) system available.

Uses less inert gas

Special gas usage system significantly cuts the volume of gas used compared to all other methods.

Faster

The Argweld® PurgElite® System is very quick and easy to install. It can be positioned accurately and the purge dams inflate instantly.

No difficult valves to set, therefore saving time

Bladder purging time is a fraction of that required by conventional methodsleading to significant savings and waiting costs. Cost savings charts are available on request.

The volume to be purged is localised.

Low Price

Dramatic decrease in prices over all similar models.

Payback in less than one weld.

Repeatability

Heat Covers PurgElite PurgExtra Tube Pipe Weld Purge Purging SystemsHighly reliable, giving regular, repeatable, controlled high quality results.

Gas pressure control ensures an even positive root bead with no notching.

Manufactured to Nuclear Quality Standards with Nuclear approved materials, these systems guarantee bright, shiny, coke and oxide-free welds.

Because Argweld® PurgElite® Inflatable Tube and Pipe Weld Purging Systems have no metal parts exposed, internally polished stainless steel tubes are protected.

Argweld® PurgElite® Inflatable Tube and Pipe Weld Purging Systems from 1" upwards are 'State of the Art' newly evolved technology by Huntingdon Fusion Techniques HFT®.

Heat Resistant Covers

Heat Resistant Covers are available for PurgElite® and PurgExtra® as an accessory. These covers are available in all sizes within the PurgElite® and PurgExtra® range 1 – 24” (25 – 600 mm).

Manufactured from a robust material, the Heat Resistant Covers protect the inflatable dams at each end of the system, with a temperature range of up to 300ºC (572ºF).

Ties on each Cover ensure they are held securely to the Inflatable Tube and Pipe Purging System. Holes are designed on each Cover for the PurgElite® or PurgExtra® fittings, such as inlet, exhaust and Weld Purge Monitor® connection.

The Heat Resistant Covers are sold as a pair, or can be manufactured as a single unit if required.

Contact us - See our Worldwide Offices

Read More

Ideal for 'Clean in Place' or 'Steam in Place' Welds

PurgElite Tube and Pipe Purge Systems Purge Bladders Purging Dams

For many industries, such as food, semi-conductor, chemical, pharmacutical, bio-ethanol as well as any others where hygienic, aseptic, 'Clean in Place' (CIP) or 'Steam in Place' (SIP) welds have to be made.

High Purity

Food, Diary, Pharmaceutical, Beverages

All of the above mentioned industries use vast volumes of small diameter stainless steel tubing where Argweld® PurgElite® Tube and Pipe Weld Purging Systems will be valuable to help in providing optimum welding results when used in conjunction with the Company's PurgEye® range of Weld Purging Monitors.

Biochemical processes

PurgElite Tube and Pipe Purge Systems High Purity WeldsBioprocessing operations have continued to grow for 20 years controlling the risk of contamination.

This has pushed the demand for high-purity system design even beyond the boundaries of the pharmaceutical industry and has cascaded into industries that are typically unfamiliar with the need for system cleanability.

Amongst other applications, Argweld® PurgElite® Tube and Pipe Weld Purging Systems are designed for pristine Tube and Pipe Purging, (CIP) and (SIP) techniques as well as the Bio applications.

If the proper steps are not taken throughout the process, a proliferation of unwanted bacteria can devastate colonies of the desired bacteria, ruining the process.

The only segments of this process that would require high purity PurgElite Purge Bladders Purging Damspiping design concepts are those that handle the enzymes.

Argweld® PurgElite® Weld Purging Systems are particularly valuable for use in these emerging areas of High Purity Processes such as Bioethanol Processors and Biofuels Production.

Nuclear

These new products from Huntingdon Fusion Techniques HFT® will be valuable for use with Nuclear Power Pipework particularly for repairing the inconel steam tubes in aging nuclear reactors that has been highlighted in the press recently following the problem in Japan and discoveries of potential leak areas in nuclear steam pipes elsewhere around the world.

In addition to their application in full size Nuclear Power Stations, the PurgElite® systems will be valuable in construction and repair of the massive volumes of small diameter tube and pipework in Nuclear Submarines and Nuclear Fuel re-processing facilities.

Semi Conductor

Tubing and piping used throughout the semiconductor industry requires a degree of purity that is even higher even, than that required of the pharmaceutical, food-and-dairy industries

Semiconductor operations have a critical need to mitigate the potential for particulate contamination, which can be devastating to today's highly miniaturised electronic components.

Microscopic particles in semiconductor facilities, whether coming from equipment, tubing, or the various fluids used during the manufacture of silicon chips, can render the chip useless, or at the very least, out of specification.

So achieving acceptable, repeatable welds is a key element during the fabrication of high-purity piping systems.

These high-purity welds are accomplished most efficiently by means of a certified welding operator using an orbital welder and PurgElite® Tube and Pipe Purging Systems together with the PurgEye® range of Weld Purge Monitoring instruments.

In addition, there is a myriad of other applications where stainless steel, titanium and nickel alloys require weld purging to this high degree of quality including offshore, aerospace, liquid natural gas and so on, where the PurgElite® Pipe Purging Systems will make a valuable contribution to saving time, saving gas and preventing errors, particularly when used in combination with the Company's Weld Purge Monitoring instruments, some of which that have data acquisition software for quality control procedures.

For larger diameters, Huntingdon Fusion Techniques HFT® manufactures its rugged Argweld® Quick Purge® Systems to suit diameters from 6 to 96 inch (150 to 2400 mm).

 

Contact us - See our Worldwide Offices

Read More

Technical Data and Specification

PurgElite Tube and Pipe Purge Systems with PurgEye 100 Weld Purge Monitor

Argweld® PurgElite® Inflatable Tube and Pipe Purging Systems are available from 1" to 24" (25 to 600 mm).

High quality circumferential butt-welding of tubes or pipes with other tubes, pipes or fittings, requires inert gas to be used inside the bore to prevent oxidation and notching of the root penetration weld bead.

The tandem based Argweld® PurgElite® Inflatable Tube and Pipe Weld Purging System has been designed specially for this work.

Each system has 2 protected inflatable dams connected by an armoured heatproof spinal tube.

Once ready to start purging, the system is inserted into the bore with one purge dam either side of the weld joint.

The spinal tube carries the gas to inflate the purge dams and the low profile valve to release the gas gently, to purge the interspace without turbulence.

When the gas connection is made and opened, the purge bladders inflate to form a seal, after which the pressure in the system opens the purge valve.

The inert gas is then fed into the space between the purge bladders expelling the air through the integral exhaust tubes.

Welding can then be carried out with the inert gas ensuring a clean even penetration bead.

Note: Welding will probably be started once the Argweld® PurgEye® Weld Purge Monitor® indicates the required low level of oxygen has been reached.

Afterwards, the purge dams are deflated simply by disconnecting the purge gas feed and the device easily removed. This uniquely designed system means that only one gas connection is required for both dam inflation and weld purging.

An equal number of outlets are provided. Unwanted connections are left closed with the blanking plugs provided.

This range of Argweld® PurgElite® Tube and Pipe Purge Systems are for pipes of nominal diameters from 1" (25 mm) to 24" (600 mm).

The connecting spinal tube can be shortened or lengthened to accommodate special requirements.

PurgElite® PURGE TIME (to 0.1% oxygen and less)

By using Argweld® PurgElite® Tube and Pipe Weld Purging Systems, the main savings, over any other system, are obtained in reduced
purging and waiting time, and in the much lower quantity of inert gas used.

Purging with old fashioned systems and homemade devices will require a flow rate of at least 24 L/min (50 cu ft/hr)
for longer periods.

The chart below shows a typical purge time to reduce the air space to less than 0.01% oxygen.

Purge time for PurgElite® Inflatable Tube and Pipe Weld Purge System to less than 100 ppm oxygen.

Test Pipe Diameter 4" (100 mm)

Old fashioned or home made devices:

Purge time to 1,000 ppm.... 26 minutes
Flow rate 50 CFH (24 L/min).... inert gas usage 18 Cu ft (624 liters)

Argweld® PurgElite® Inflatable Tube and Pipe Weld Purging System:

Purge Time to 100 ppm.... 3 mins 6 secs
Flow rate 21 CFH (10 L/min).... inert gas usage 0.9 Cu ft (30 Liters)
Purge Time below 35 ppm.... 7 - 10 mins (with extra gas inlet and exhaust integrated)

 

Contact us - See our Worldwide Offices

Read More

Comparison of the PurgElite® verses older models

Outstanding new features on our latest model of Inflatable Pipe Purging Systems can be easily recognised as state of art technology when it comes to using a Argweld® PurgElite® Inflatable Tube and Pipe Weld Purging System.

Old Style Pipe Purge Bladders and Purging Dam Systems "NEW" PurgElite® Inflatable Pipe Weld Purging System

Old Style Inflatable Pipe Weld Purging Systems Purge Bladders Dams

PurgElite Pipe Weld Purge Systems Purging Bladders Dams

Old large profile valve

Old complicated valve adjustment

Occasional burst purge bladders

Metal parts scratch interiors of polished pipes

High vapour pressure materials that outgas when heated

 

No metallic parts to scratch interior of polished pipes

No large complicated valve

No wasted time setting valve

No burst inflatable dams when making a setting error or when operators do not pay attention to gas flow rate

No chance of inflatable dams bursting due to over pressurisation

One hose from the inert gas supply is all that is needed

  PurgElite® a scientifically better advanced product...!

 

Contact us - See our Worldwide Offices

Read More

See what our Customers have to say....

01W PurgEliteWeldPurgeSystemsHuntingdon Fusion Techniques HFT® have received numerous letters of praise from users, many of them major international manufacturers.

Here are some comments which have been received in writing to give you an idea of the benefits others have experienced using Argweld® PurgElite® Purge Bladders and Dams

Please contact us by email for actual user names and user lists which can be obtained separately.

Near to completing 6" and 4" stainless steel pipe work at Britisch Sugar, we used the PurgElite from 'Huntingdon Fusion Techniques' which was a great success saving us both time and gas.

James Smith, Process Piepe Work Engineering

The 40" purge bags we purchased some 2 years ago have been worth their weight in gold to us in the construction phases of the large project we are coming to a close with. The 40" was always going to be problematic but the system we had worked perfectly.

Roger Lee

 

Contact us - See our Worldwide Offices

Read More

Frequently Asked Questions

PurgElite Tube and Pipe Purge Systems

1.0 Can I use an inflatable purge system in a smaller or larger pipe?

In the event that the correct size is not available, adjacent sizes may be usable as there is some crossover in the range of each model. Check the specification sheet.

2.0 What happens with pre-heated pipes?

See Argweld® HotPurge™ Heat Resistant Systems.

3.0 I cannot inflate the device properly.

In the event that the dams do not inflate sufficiently to seal within the pipe, check that the size of the PurgElite® System matches the pipe internal diameter.

Otherwise, try increasing the pressure from the regulator, very slightly.

4.0 What is the distance between the inflated dams?

The spinal tubes between the dams are of a standard length. A chart is available showing the length for each size of system. They can be manufactured shorter or longer, according to customer requirements.

5.0 What happens if one dam is damaged, do I have to purchase a whole new assembly?

No, the quick release fittings allow you to disconnect the damaged dam and replace it.

6.0 Can I weld return bends with the Argweld® PurgElite® Inflatable Tube and Pipe Weld Purging Systems?

Yes. The covers allow the assemblies, with the new design low profile valve, to easily slide around bends.

7.0 What is the maximum operating temperature for the standard Inflatable Pipe Purging Systems?

The connection hose has a temperature resistance of 700ºC (1292ºF) with 80?C (176ºF) for the inflatable dams.

 For pre-heated pipes, refer to our Argweld® HotPurge™ Heat Resistant Systems.

 

Contact us - See our Worldwide Offices

Read More

Shipping Information, Weights and Dimensions

PurgElite Tube and Pipe Purge Systems, Purge Bladders and Dams

Customs Tariff:

European Customs Tariff: 4016 9500
International Customs Tariff: 4016 999 0900
United States Customs Tariff: 8515 90 2000
Canada Customs Tariff: 8515 90 2000

Product Codes and Sizes:

Argweld® PurgElite® Inflatable Tube and Pipe Weld Purging Systems are manufactured in large quantities in all sizes and are usually available for immediate delivery.

1 to 24" (25 to 600 mm)

Note: In the event that the correct size is not available, adjacent sizes may be usable as there is some crossover in the range of each model as shown in the internal diameter range.

 

 

 

Argweld® PurgElite® Inflatable Tube and Pipe Weld Purging Systems 1 to 24" (25 to 600 mm) Diameters

PART Nº NOMINAL PIPE SIZE WEIGHT INTERNAL DIAMETER RANGE
PL10001
PL10001.5
PL10002
PL10003
PL10004
PL10005
PL10006
PL10007
PL10008
PL10010
PL10012
PL10014
PL10016
PL10018
PL10020
PL10021
PL10022
PL10023
PL10024
25 mm
38 mm
50 mm
75 mm
100 mm
125 mm
150 mm
175 mm
200 mm
250 mm
300 mm
350 mm
400 mm
450 mm
500 mm
525 mm
550 mm
575 mm
600 mm
1"
1.5"
2"
3"
4"
5"
6"
7"
8"
10"
12"
14"
16"
18"
20"
21"
22"
23"
24"
0.2 kg
0.2 kg
0.2 kg
0.2 kg
0.2 kg
0.2 kg
0.3 kg
0.3 kg
0.4 kg
0.4 kg
0.5 kg
0.6 kg
0.7 kg
0.8 kg
0.9 kg
0.9 kg
1.0 kg
1.0 kg
1.1 kg
24 - 31 mm
31 - 44 mm
44 - 57 mm
58 - 84 mm
80 - 110mm
103 - 135mm
124 - 162mm
164 - 190 mm
175 - 213 mm
216 - 285 mm
285 - 315 mm
342 - 368 mm
393 - 419 mm
444 - 469 mm
495 - 520 mm
520 - 532 mm
533 - 571 mm
572 - 583 mm
584 - 622 mm
 
APGV001 PurgeGate Valve
APBS401 30 Metre argon feed hose assembly for connecting Argweld® Pipe Purging System to gas supply (bottle or regulator) fitted at one end with a 3/8" female gas regulator connector and at the other end with a fitting to attach to the Pipe Purging System inflation hose.



Heat Resistant Covers for PurgElite® and PurgExtra®

  PART Nº INCHES MM
Heat Resistant Covers
Heat Resistant Covers
Heat Resistant Covers
Heat Resistant Covers
Heat Resistant Covers
Heat Resistant Covers
Heat Resistant Covers
Heat Resistant Covers
Heat Resistant Covers
Heat Resistant Covers
Heat Resistant Covers
Heat Resistant Covers
Heat Resistant Covers
Heat Resistant Covers
Heat Resistant Covers
Heat Resistant Covers
Heat Resistant Covers
Heat Resistant Covers
Heat Resistant Covers
HRC1001
HRC1002
HRC1003
HRC1004
HRC1005
HRC1006
HRC1007
HRC1008
HRC1009
HRC1010
HRC1011
HRC1012
HRC1014
HRC1015
HRC1016
HRC1018
HRC1020
HRC1022
HRC1024
1"
2"
3"
4"
5"
6"
7"
8"
9"
10"
11"
12"
14"
15"
16"
18"
20"
22"
24"
25 mm
50 mm
75 mm
100 mm
125 mm
150 mm
175 mm
200 mm
225 mm
250 mm
275 mm
300 mm
350 mm
375 mm
400 mm
450 mm
500 mm
550 mm
600 mm

 

Contact us - See our Worldwide Offices

Read More

Items available as 'Downloads' 

PurgElite Tube and Pipe Purge SystemsLeaflets and general sales material are available to everyone visiting our website.

Restricted access items are shown at the end of this Download section.

 

Argweld® PurgElite® Inflatable Tube and Pipe Weld Purging Systems
A3 Technical Leaflet

Argweld® PurgElite® Inflatable Tube and Pipe Weld Purging
Systems Sales Flyer

Argweld® PurgElite® Inflatable Tube and Pipe Weld Purging
System Data Application Sheet

Argweld® PurgElite® Inflatable Tube and Pipe Weld Purging FAQ

Pipe Purging Systems Range Promotional Poster

Pipe Purging Systems Range Flyer

Argweld® PurgeGate® Leaflet

Argweld® PurgeGate® Flyer

Argweld® Heat Resistant Covers Leaflet

Argweld® Heat Resistant Covers Flyer

 

Special Note: The items below are restricted and only available in our Secure Login section.  This is mainly for the protection of our Exclusive Distributor network. Should you wish to receive an item mentioned below which is not active as a 'download' link on this page, please contact us or your nearest Distributor.

Argweld® PurgElite® Inflatable Pipe Weld Purging Systems User Instructions Technical Manual
Argweld® PurgElite® Inflatable Pipe Weld Purging Systems User List Customer Reference
Argweld® PurgElite® Inflatable Pipe Weld Purging Systems Technical Data Sheet TDS
Argweld® PurgElite® Inflatable Pipe Weld Purging Systems Technical Notes
Argweld® PurgElite® Inflatable Pipe Weld Purging Systems Material Safety Data Sheet MSDS
Argweld® PurgElite® Inflatable Pipe Weld Purging Systems Diagram Flange Purging
Argweld® PurgElite® Inflatable Pipe Weld Purging Systems Diagram Set Up
Argweld® PurgElite® Inflatable Pipe Weld Purging Systems Diagram Set Up for Specials
Argweld® PurgElite® Inflatable Pipe Weld Purging Systems Diagram T Piece Welding
Argweld® PurgElite® Inflatable Pipe Weld Purging Systems Certificate of Conformity
Argweld® PurgElite® Inflatable Pipe Weld Purging Systems Price List
Argweld® PurgElite® Inflatable Pipe Weld Purging Systems Price List Spares

 

Contact us - See our Worldwide Offices

Read More