Specification

Technical Data and Specification

Argweld Argon Gas Feed Hose Accessories Weld Purging Pipe Purge Systems

Temperature Range

From -30º up to +80ºC.

Quality Standards

Conforming to BS EWN 599.

Safety Use and Factors

Safety factor of 3 times working pressure, 20 bar (300 psi).

Reinforcement

Polyester cord is used to reinforce the hose.

Tube Inside

Each hose has a smooth black natural rubber finish. (Natural rubber sheeting has mechanical properties making it particularly appreciated in environments subject to heavy wear due to friction.)  

Styrene-butadiene or styrene-butadiene rubber (SBR) is used in addition.

Outer Cover

Smooth black EPDM rubber is used.  

Product Marks and Branding

The product marks and branding are shown in white lettering and usually stated as follows:

ARGON GAS HOSE BS EN 599 20 BAR (300 PSI) WP-MM.ID. 

Use only Argweld® top quality Argon Feed Hose with leak tight fittings to feed your argon gas without generating contamination at the weld zone from leaky fittings or poor quality hose.  

 

Contact us - See our Worldwide Offices