Oxidation Free Weld Beads with Weld Backing Tape™

weld backing, back purging, huntingdon fusion, inert gas purgingWelders are often faced with challenges where high quality stainless steel, duplex and chrome steel welds are required, but where the use of purge gas is not always possible.

One solution to this problem is the use of Argweld® Weld Backing Tape™ from Huntingdon Fusion Techniques HFT®. This high temperature resistant glass fibre tape supports weld roots and eliminates the creation of slag, while removing contact with air to dramatically reduce the amount of oxidation.

Luke Keane, Technical Sales Manager for HFT® said: “Weld Backing Tape™ is a common material used for manual and automatic welding to achieve higher welding speeds and dramatically reduce the amount of post weld cleaning. 

The HFT® glass fibre Weld Backing Tape™ has no true melting point so it works satisfactorily with TIG or MIG welding (GTAW or GMAW) where temperatures can reach up to 6,000ºC. This overcomes the concerns associated with ceramic fibre versions that have a melting point of 1,800ºC,

HFT® manufactures four grades of Weld Backing Tape™ for use up to 80, 160, 240 or 600 Amps.

Each tape comprises a 3" (75mm) wide aluminium adhesive tape, in the centre of which is a 1" (25mm) wide band of woven glass fibre. The glass fibre matting has differing thicknesses to match the welding current in use.

Once the tape is positioned with the glass fibre matting under the centre of the weld joint, the welders can start their arc. The welding torch argon flow has plenty of space to move between the pores of the matting, which allows the welding arc to stabilise and start forming the weld root.

 

weld backing tape, back purging, weld purge, weld purging techniques weld backing tape, back purging, weld purge, weld purging techniques

 

Huntingdon Fusion Techniques HFT® have a Worldwide Exclusive Distributor Network.

More information


 

This Press Release is Succesfully Published in Worldwide Magazines, by clicking the logo you can read the article: 

 Logo OilVoice  Read the published article directly in the magazine OilVoice
 Logo ITA  Read the published article directly in the magazine International Tube Association
 Logo The Fabricator  Read the published article directly in the magazine The Fabricator
 

 


Huntingdon Fusion Techniques HFT® are proud members of:

American Welding Society International Tube Association The Welding Institue Welding World


You are not allowed to use or copy any of this material or content without the written permission of Huntingdon Fusion Techniques HFT®, copyright protected. All rights belong to Huntingdon Fusion Techniques HFT® exclusively. Not for any reproduction without consent.