News

Lightweight Aluminium Plugs for Heavy-Duty Applications

pipe stoppers, pipe plugging, debris stopping, blocking pipes, aluminium plugsThere are many applications where pipes carrying chemical fluids (alkaline or acidic) or that are exposed to high temperatures need to be plugged or sealed.

The Pipestoppers® Division at Huntingdon Fusion Techniques HFT® manufacture a Range of heavy-duty Aluminium Plugs to allow for arduous duties such as exposure to high temperatures and immersion in chemicals, in sizes 1.5 to 36” (38 - 900 mm).

Ron Sewell, Chairman for HFT® said: “Often, in refineries, offshore operations, plumbing operations and domestic and industrial water activities, heavy-duty plugs are required to block pipes where the plug is likely to be immersed in chemicals or exposed to high temperatures. Our Range of Aluminium Plugs can be used for leak testing, isolation, sealing, stopping and weld purging of pipes in harsh environments.”

Available up to 36” (900 mm) diameter, these lightweight, but heavy-duty Plugs are manufactured with a friction-free washer to ease tightening of the ring nut to expand the rubber ring to make a completely leak tight seal. In addition, because the Plugs are neutrally buoyant they can also be used in sub-sea environments.

The standard natural rubber seal can be replaced with silicone, nitrile, neoprene or Viton rings to ensure they can be used for applications where greater resistance to a variety of materials is required, allowing for use at temperatures up to 350ºC (662ºF).

The Pipestoppers® Aluminium Plug Range, which starts at 1.5” (37 mm) diameter, has a wide variety of other applications throughout sewage and drainage systems, ducting and conduit, swimming pools, boating, shipping, offshore applications and so on. The Plugs are also used to seal and protect tanks, vessels and containers during cleaning and transportation, particularly when they are pressurised with inert gas.

All Plugs conform to British Standards BS8005 and BS EN752-4 for low pressure testing and sealing of pipes.

Other Plugs and Stoppers in the Pipestoppers® Division include Nylon and Steel Mechanical versions for low, medium and high pressure stopping requirements and Inflatable Stoppers that can be transported anywhere at low cost, quickly and easily for a number of low pressure and medium pressure plugging and stopping.

  

Aluminium Plugs, drain plug, leak testing, pipe plugging, pipe stopping pipe blocking, pipe stopping, aluminium plugs, leak testing, drain stoppers

 

Huntingdon Fusion Techniques HFT® have a Worldwide Exclusive Distributor network.

More information


 

This Press Release is Succesfully Published in Worldwide Magazines, by clicking the logo you can read the article: 

Logo TubeFirst NEW Read the published article directly in the magazine TubeFirst
Logo Oil and Gas Read the published article directly in the magazine Oil and Gas Product News
Logo Wire and Tube News Read the published article directly in the magazine Wire and Tube News
Logo WorldPipelines Read the published article directly in the magazine World Pipelines
Logo The Fabricator Read the published article directly in the magazine The Fabricator

 


Huntingdon Fusion Techniques HFT® are proud members of:

American Welding Society International Tube Association The Welding Institue Welding World


You are not allowed to use or copy any of this material or content without the written permission of Huntingdon Fusion Techniques HFT®, copyright protected. All rights belong to Huntingdon Fusion Techniques HFT® exclusively. Not for any reproduction without consent.