News

Achieve High Quality Welds with a Close Eye on your Weld Purge

weld purging, back purging, purging with argon, stainless steel welding, critical weldsWelding high quality joints in stainless, duplex and chrome steels as well as titanium, nickel alloys and zirconium may require oxygen levels to be as low as 10 ppm.

To measure oxygen accurately at such low levels for quality welding, the comprehensively updated PurgEye® 300 Plus is an ideal choice.

This model now includes the revolutionary PurgeNet™ facility, allowing connection of accessories such as an automatic welding machine interface and a long distance visual alarm system. In additional this gas analyzer indicates actual oxygen levels down to 1 ppm (accurate to 10 ppm) on a large alphanumeric OLED display, perfect for achieving oxide-free, zero colour welds repeatedly.

The PurgEye® 300 Plus is menu driven by four push buttons on the front and has an internal audible alarm so acceptable and unacceptable oxygen levels can be pre-set. A well-shielded, long-life oxygen sensor, inside the monitor, means there is very little maintenance requirement.

As well as having superb internal electronic shielding against high frequency electronic disturbances, common with welding power supplies, the PurgEye® 300 Plus is equipped with PurgeLog™, for Quality Control purposes, where data can be stored or printed and transferred to a PC.

No longer do welders have to use conventional oxygen monitors that are calibrated to be correct at atmospheric levels, mostly for health and safety purposes. They can use the PurgEye® 300 Plus Weld Purge Monitor that is calibrated down to 1 ppm to give welding level requirements and accuracy. 

  

weld purge monitor, oxygen analyser, oxygen reader, weld purge reader, handy purge purgeye, gas sniffer, oxygen monitor, weld purging, back purge monitor

 

Huntingdon Fusion Techniques HFT® have a Worldwide Exclusive Distributor network.

More information


 

This Press Release is Succesfully Published in Worldwide Magazines, by clicking the logo you can read the article: 

Logo TubeFirst NEW Read the published article directly in the magazine TubeFirst
Logo ITA Read the published article directly in the magazine International Tube Association
Logo Thomasnet Read the published article directly in the magazine ThomasNet

 


Huntingdon Fusion Techniques HFT® are proud members of:

American Welding Society International Tube Association The Welding Institue Welding World


You are not allowed to use or copy any of this material or content without the written permission of Huntingdon Fusion Techniques HFT®, copyright protected. All rights belong to Huntingdon Fusion Techniques HFT® exclusively. Not for any reproduction without consent.