News

Weld Backing Tape™ for Weld Purging

15W-WeldBackingTapeIt is important when welding metals such as stainless steel, titanium and zirconium that the welding zone is purged of oxygen even to as low as 10 parts per million (ppm) before, during and immediately after welding, in order to achieve a clean, oxide free, zero colour weld.

Recently an exciting discovery was made concerning the use of Argweld® Backing Tape™ available in Italy from Andit Automazione.

One customer showed how the use of his former ceramic backing tiles and the tiny space available for the weld root formation, prevented adequate argon flow and caused the welding arc to blow back at the welder.

Massimo from Andit said: "Ceramic backing tiles are designed for Submerged Arc Welding where oxidation is prevented by powder as opposed to argon, so the customers were using the wrong product for GTAW / TIG welding.

 

A demonstration of Argweld® Backing Tape™ followed, which allowed the argon to flow freely, eliminating the blow back of the arc that was happening previously and enabling the welders to produce a perfect root weld.”  

 

08W-WeldBackingTapeThe Weld Backing Tape™ comprises a 3" (75mm) wide aluminium adhesive tape backing strip, in the centre of which is a 1" (25mm) wide band of woven glass fibre matting.

Once the tape is positioned with the glass fibre matting under the centre of the weld joint, the welders can start their arc. The welding torch argon flow has plenty of space to move between the pores of the matting, which allows the welding arc to stabilise and start forming the weld root.

Measured by a Weld Purge Monitor®, all contaminating oxygen below 100 parts per million (ppm) is removed and the stainless steel weld root is completed successfully, with the molten metal being cast onto the fibre glass with excellent side wall fusion and underbead profile.

The customer was so enthusiastic with the clean, metallurgically sound, non-oxidised weld that they placed a large order for Weld Backing Tape™ for immediate delivery. Fortunately, the local Distributor had sufficient stock levels, were able to accommodate their wishes within hours and have them welding the same day.

Huntingdon Fusion Techniques HFT® have a Worldwide Exclusive Distributor network.
Please visit www.huntingdonfusion.com.

More Product Details

youtube

 

 

 

 
For more information, please contact:

 

Press:      This email address is being protected from spambots. You need JavaScript enabled to view it.
Sales: This email address is being protected from spambots. You need JavaScript enabled to view it.
Tel.: +44 1554 836 836

 


This Press Release is Succesfully Published in Worldwide Magazines, by clicking the logo you can read the article:

Logo-oilecho

Logo OilVoice


Logo Energy Global NEW

Logo TubeFirst NEW
 
Logo ITA  Logo EngineerLive copy
Logo EngNet Logo Engineering News-New
Logo The News