Argweld® PurgEye® 1000 Remote Weld Purge Monitor®

  • Product
  • Overview
  • Key Features
  • Specification
  • FAQ
  • Ordering
  • Downloads
  • Gallery
  • Videos

Keep a distant 'Eye' on your Weld Purge... up to 1 km away!

The World's 'first and only' remote (long Distance) Weld Purge Monitor®, measuring accurately down to 10 ppm. With an internal electro-mechanical pump, battery or mains power driven and now with PurgeNet™.

PurgEye 1000 Remote Weld Purge Monitor Oxygen Analyser Gas Analyzer

PurgEye® 1000 Remote Sensing Head can be fitted onto a mechanical or inflatable purging system, directly at the weld location and will measure oxygen level in the purge gas and transmit the information electronically to the monitor up to 1 km away. With this capability, operators can obtain an instantaneous and correct weld purge reading no matter how far they are from the weld and be certain that the joint will not be adversely affected by oxidation.

Our Weld Purge Monitors® have been specifically designed for excellent weld purging conditions creating the best oxide-free zero color welds. Oxygen monitors for welding purposes, including gas analysers (gas analyzers), oxygen instruments or oxygen indicators are not sufficient to provide good clean welds.

PurgEye® a 'Family' Series of Weld Purge Monitors® invented by HFT® in the 1970’s. Registered Trademarks in USA and Europe.

 

Technical Comparison of all Weld Purge Monitors®

Use this chart to find which model suits your requirements and to make an informed choice.

Read More...

 

Return on Investment (ROI)

All Argweld® Pipe Weld Purging Systems and all PurgEye® Weld Purge Monitors® provide instant Return on Investment.

Read More...

 

Contact us - See our Worldwide Offices

Read More

Measuring down to 10 ppm as far as 1 km away

PurgEye 1000 Remote Weld Purge Monitor Oxygen Analyser Gas Analyzer

When welding joints in long tube line or pipeline sections, it may not be practical to measure the purge gas exhaust close to the weld.

Measuring purge gas exiting in the joint gap is also unsatisfactory because of the the oxygen being drawn in from outside and other variable factors.

HFT® has developed an answer to this difficulty, namely a sensing head that can be fitted onto the purging system, directly at the weld location and will measure oxygen level in the purge gas and transmit the information electronically to the remote monitor and operator that may be up to 1 km away.

In this way, the operator can be certain that the weld purge reading is correct and that the joint will not be adversely affected by oxidation.

Portable ‘handy’ Purge Monitor, reading from 1000 ppm down to 1 ppm (accurate to 10 ppm).

The PurgEye® 1000 Remote, now with PurgeNet™ is equipped with a stainless steel sensing head, which connects onto any Inflatable or mechanical Tube, Pipe and Pipeline Weld Purging System, producing accurate readings up to 1 km away from the weld.

The sensing head and the integral electro-mechanical pump are powered by the data cable, so only one cable is required. The sensor head is small enough to fit inside pipes from 1” (25 mm) diameter, upwards and is easily manoeuvred through pipes.

PurgEye® a Family Series of Weld Purge Monitors®.

 

Contact us - See our Worldwide Offices

Read More

Weld Purge Monitoring Now with PurgeNet™

Argweld PurgEye 1000 Remote Weld Purge Monitor Oxygen Analyzer Welding Gas Analyser

The PurgEye® 1000 has been developed with a sensing head that can be fitted onto the Tube, Pipe and Pipeline Weld Purging System, directly at the weld location and moved from joint to joint. The new, fast response, zirconia oxygen sensor will measure oxygen level in the purge gas and transmit the information electronically to the monitor, up to 1 km away.

PurgeNet ™

The PurgEye ® 1000 now comes complete with PurgeNet™, which can control Automatic Welding Systems as well as Orbital Welders, causing them to switch on and off for example when oxygen level rises too high or falls too low.

PurgeAlarm ™

The IP66 Rated (Environmental Protected) PurgeAlarm™ displays a red indicator, if the monitor reading has a greater value than the alarm threshold set by the user.

An optional green indicator can be fitted above the standard red indicator and will illuminate if the reading has a value lower than the alarm threshold set but the user. A sounder is available as an option to provide an audible alarm instead of the red light.

PurgeNet™ also works with PurgeLog™ to easily transfer weld purge data for Quality Control purposes.

The Argweld® PurgEye® 1000 Remote Weld Purge Monitor® comes with a hand held display, a sensor head hermetically sealed inside a small round stainless steel tube and a 10 m lead as standard.

Optional Docking Station for charging the battery if required. The unit will run from 100 – 250 volts, 50 hz supply.

Other features of the PurgEye® 1000:

  • Optional 100 m reel of outdoor cable with locking connectors.
  • Reels of extension cable can be connected together to make longer leads up to 1 km.
  • Shorter or longer lengths can be supplied to order to suit application.
  • PurgEye® 1000 display, battery or mains powered.
    Suitable for fitting to mechanical or inflatable purging systems for 1” diameter pipe and larger.
  • The head will be powered from the data cable, so only one cable is required.
  • Because the unit is small and round, it is easy to pull through pipes.

Huntingdon Fusion Techniques HFT® are bringing yet another innovation to the market place with this new PurgEye® 1000 Remote Weld Purge Monitor®. Weld Purge Monitors® have been developed and manufactured by HFT® specifically for welding of high quality materials as ordinary oxygen monitors cannot achieve the accuracy required for welding purposes.

HFT® use real science and technology to create proven and original products.

 

Contact us - See our Worldwide Offices

Read More

Technical Data and Specification

PurgEye 1000 Remote Weld Purge Monitor Sensor Display Unit

Measuring range from 1,000 ppm down to 1 ppm (accurate to 10 ppm).

The PurgEye® 1000 Remote also supports the following:

  • Remote sensor head including electro-mechanical pump.
  • Two user settable limits for alarm and process control.
  • Relay contacts are included for monitoring the oxygen level.
    The contacts are no/nc (Normally open/normally closed) and volt free.
    They can be used to activate an alarm or switch a welding machine off and on again when the oxygen level rises above or falls below preset limits.
  • Sounder for out of range oxygen readings.
  • Key tones, to confirm button presses.
  • RS-232 port for connecting to a personal computer (PC).
  • Data logging facility, via PC.
  •  Machine status input (for data logging).
  • Small, light and portable.
  • Selectable display and language.

Range: 10 – 1000 ppm
Accuracy : + 25 ppm
Warm-up time: 2 minutes
Response time: 30 seconds
Reproducibility: < 15 ppm
Power consumption: Max. 18V

Use only weld purge hose leak tight quick disconnect fittings suitable for connecting 6 mm OD polyurethane tubing. Do not try to use other diameter tubing because it will not seal properly and will end up causing leaks.

The PurgEye® 1000 Remote Weld Purge Monitor® is simple to use, real plug and play.

The sensor A is connected to the exhaust of the purging device, which is located directly at the weld site.

The exhaust purge gas flows through tube A and is measured by the remote sensing unit B, which sends the results electronically back to the display unit C.

The sensing head B can be supplied with fixing brackets so that it can be fitted to an internal pipe clamp with purging seals or stand alone pipe weld purging system.

 

PurgEye 1000 Remote Weld Purge Monitor Sensor Unit Metal

PurgEye 1000 Remote DIA Chart Schematic

 

Dew Point Sensordew Point Sensor for accurately measuring the dew point.

During purging welders need to measure the oxygen content but also need to measure the ‘dew point’.

The dewpoint is the temperature where condensation begins and water will condense on the material being welded. This can affect the weld properties significantly.

We have recently added a Dew Point Sensor to our range that can be used in conjunction with our range of 10 ppm Weld Purge Monitors®, so rather than purchasing a separate, expensive Dew Point Meter, HFT®’s Dew Point Sensor that can be connected to the Weld Purge Monitor® via the PurgeNet™ lead.

The dew point sensor is designed to fit any of our Weld Purge Monitors® that read down to 1ppm:

- PurgEye® 200

- PurgEye® Desk

- PurgEye® 600

- PurgEye® 1000

- PurgEye® Site

Compare all Weld Purge Monitors® in the PurgEye® Family Range

 

Contact us - See our Worldwide Offices

Read More

Frequently Asked Questions

PurgEye 1000 Remote Weld Purge Monitor for Purging up to 1 km in the distance

1.0 What sort of sensor is used in the Argweld® PurgEye® 1000 'Remote' Weld Purge Monitor®.

The Argweld® PurgEye® 1000 Remote Weld Purge Monitor® uses a solid state sensor of a unique design. It is much lower in cost than other sensors, has a faster reaction time than other sensors and has a long life.

2.0 What is the intended application for the Argweld® PurgEye® 1000 Remote Weld Purge Monitor®?

The Argweld® PurgEye® 1000 Remote Weld Purge Monitor® allows the sensing head to be placed up to 1 km away from the instrument so that readings from inside a pipeline or pipe fabrication can be taken directly at the joint.

3.0 Is the Argweld® PurgEye® 1000 Remote Weld Purge Monitor® sensitive to electrical disturbances?

Each instrument has shielding to prevent most forms of interference. Quality Control Test and Inspection criteria are designed to account for as many variables as possible. It is extremely rare that electrical interference will affect the monitor.

4.0 My Company needs a Calibration Certificate once a year for all instruments. How do I obtain one?

Huntingdon Fusion Techniques HFT® has a recalibration facility. Contact us or your nearest distributor for pricing. Your instrument will be sent to use, we will re-calibrate it and return it within a certificate within in a few days.

5.0 What is the minimum pipe size in which the sensor head can be used?

1” (25 mm) diameter).

6.0 What is the sensor head housing made from?

Stainless steel.

7.0 Do I need to fix the sensing head to the purging system?

Huntingdon Fusion Techniques HFT® can supply fixtures for the head to be mounted in a stable fashion to any kind of mechanical or inflatable pipe purging system.

8.0 What is inside the sensor head?

The sensor head contains an electro-mechanical pump to ensure a steady flow of exhaust gas across the sensor for stable measurement purposes.

9.0 Can Weld Purge Monitors® only be used when purging with argon?

The PurgEye® Weld Purge Monitors® measure the oxygen level within any gas, not only inert gases. They can be used to monitor the oxygen level when using inert gases such as argon and helium and also non-inert gases including nitrogen and nitrogen/ hydrogen mixes

10.0 What is PurgeNet™?

PurgeNet™ controls the welding power sources such as orbital welders and any other automatic welding systems to switch on and off according to oxygen levels, transferring data easily with the ability to link to external devices.

 

Contact us - See our Worldwide Offices

Read More

Shipping Information, Weights and Dimensions

Argweld PurgEye 1000 Remote Weld Purge Monitor Oxygen Analyzer Welding Gas Analyser

Customs Tariff: 

European Customs Tariff:                    9026 1089
International Customs Tariff:  9026 80 6000
United States Customs Tariff: 9026 80 6000
Canada Customs Tariff:   9026 80 6000

 

Product Codes and Sizes:

Shipping dimensions:                385 x 330 x 100 mm
Volumetric weigh: 2.5 kg
   
Actual instrument dimensions: 120 x 150 x 60 mm
Actual instrument weight: 1.9 kg
   
Storage carry case dimensions: 377 x 322 x 95 mm

 



Argweld® PurgEye® 1000 'Remote' Weld Purge Monitors® are manufactured in large quantities in batches and are usually available from stock for immediate delivery.

 

PART Nº PRODUCT DESCRIPTION
API1000


PurgEye® 1000 Remote Weld Purge Monitor® Oxygen Analysing Instrument
Portable hand held unit
Measuring oxygen from 1000 ppm to 1 ppm (extremely accurate to 10 ppm)

Items Included

PurgeNet™ Smart Cable for transferring Weld Purge Data
PurgeLog™ Data Logging Software (USB Data Stick)
Sample tube set with filter
Sturdy protective storage carrying and presentation case (a spare/replacement case is available for purchase)
Calibration Certificate (valid for 12 months)
User Instruction Manual
Mains power lead or cable with international plug adaptors

 


The PurgeEye® Accessories and Spares for the Argweld® Family Range of PurgEye® Weld Purge Monitors® (10 ppm - excluding Nano) are held in stock and available for immediate delivery.  

PART Nº PRODUCT DESCRIPTION
APIS308

APIS309

APIS310

APIS311

APIS1001

APIS1006
Sample tube set with filter

Filters (pack of 10) White, 0.2 micron

Filters (pack of 10) Black, 10 micron

Docking station for charging

100 m reel outdoor cable with locking connector, reels of extension cable can be connected together to make longer lengths as required up to 1 km

Sturdy protective storage carrying and presentation case


The PurgEye® Auxiliaries for the Argweld® Family Range of PurgEye® Weld Purge Monitors® (10 ppm - excluding Nano) are held in stock and available for immediate delivery. 

PART Nº PRODUCT DESCRIPTION
DPS1000

PNA-01

PNA-02

PNA-021

PNA-022

PNA-05

ATMS002
PurgeNet™ Dew Point Purging Gas Moisture Sensor

PurgeNet™ Weld Machine Interface Lead

PurgeAlarm™ Visual Alarm Indicator, red light only

PurgeAlarm™ Visual Alarm Indicator, green light (fitted on top of red light)

Bracket for PurgeAlarm™ Visual Alarm Indicator

PurgeNet™ Spare/Replacement Smart Cable

PurgeLog™ Data Logging Software for Quality Control – Replacement on USB Drive


PurgeAlarm
™ (NOTE: for use with PurgeNet™)


Service and Replacement

PART Nº PRODUCT DESCRIPTION
APIS1007 Replacement Sensor and Re-Calibration

 

Contact us - See our Worldwide Offices

Read More

Items available as 'Downloads' 

 

Leaflets and general sales material are available to everyone visiting our website.

Restricted access items are shown at the end of this Download section.

 

Argweld® PurgEye® 1000 'Remote' Weld Purge Monitor® A4 Leaflet

Argweld® PurgEye® 1000 'Remote' Weld Purge Monitor® Flyer

Argweld® PurgEye® 1000 'Remote' Weld Purge Monitor® FAQ

 

PurgeNet™ Dew Point Purging Gas Moisture Sensor™ A4 Leaflet

PurgeNet™ Dew Point Purging Gas Moisture Sensor™ Information Flyer

PurgeNet™ Dew Point Purging Gas Moisture Sensor™ FAQ

 

PurgeNet™ Smart Cable A4 Leaflet

PurgeNet™ Smart Cable Information Flyer

PurgeNet™ Smart Cable  FAQ

 

PurgeAlarm™ Visual Alarm Indicator A4 Leaflet

PurgeAlarm™ Visual Alarm Indicator Information Flyer

PurgeAlarm™ Visual Alarm Indicator Information FAQ

 

PurgeLog™ Data Logging Software Information Flyer

PurgeLog™ Data Logging Software FAQ

 

PurgeNet™ Automatic Machine Interface A4 Leaflet

PurgeNet™ Automatic Machine Interface Information Flyer

PurgeNet™ Automatic Machine Interface Information FAQ

  

Argweld® PurgEye® Weld Purge Monitors® Filters

 

Return on Investment (ROI) Weld Purge Monitors and Weld Purging Systems

Understanding Atmosphere in PPM

Parts Per Million vs Percentage of Oxygen

How to convert Percent to PPM

Argweld® PurgEye® Weld Purge Monitors® Poster

Argweld® PurgEye® Weld Purge Monitors® Technical Tips Training Posters

Argweld® PurgEye® Weld Purge Monitors® Family Range Information Flyer

Technical Comparison Table of all Argweld® PurgEye® Weld Purge Monitors®

 

Special Note: The items below are restricted and only available in our Secure Login section. This is mainly for the protection of our Exclusive Distributor network.
Should you wish to receive an item mentioned below which is not active as a 'download' link on this page, please contact us or your nearest Distributor.

Argweld® PurgEye® 1000 'Remote' Weld Purge Monitor® User Instructions Technical Manual
Argweld® PurgEye® 1000 'Remote' Weld Purge Monitor® Technical Notes
Argweld® PurgEye® 1000 'Remote' Weld Purge Monitor® Certificate of Calibration
Argweld® PurgEye® 1000 'Remote' Weld Purge Monitor® User List Customer Reference
Argweld® PurgEye® 1000 'Remote' Weld Purge Monitor® Price List

 

Contact us - See our Worldwide Offices

 

Read More