Special High Quality, Leak Tight Welding Hose for Argon Feed

argweld hose, welding hose, argon hose, nitrogen hose, purge and weldAdvancing forward in weld purging technology, Huntingdon Fusion Techniques HFT® now manufacture tailor made Argon Gas Feed Hose assemblies with leak tight fittings.

Luke Keane, Distributor Support for HFT® said: “It is important when welding stainless steels, titanium, zirconium and other reactive metals, that the welding zone is purged of oxygen, even down to as low as 20 parts per million (ppm). These special, high quality Argon Hoses, provide welders with a guaranteed leak tight method of feeding non-contaminated argon gas into their welding zone.”

The natural rubber feed hose comes complete with an argon regulator, which directly connects to any range of Inflatable Tube and Pipe Weld Purging Systems at one end and to the gas source at the other.

These hose assemblies can also be used for transporting other gases where a guaranteed leak tight delivery is required.

A selection of leak tight adaptors is provided for attaching the argon gas regulator whilst the pre-fitted other end joins up with all HFT® Argweld® Weld Purging Systems. All of these high quality fittings will eliminate welding connection difficulties that welders might experience on site.

The Argon Gas Feed Hoses can also be supplied to all other TIG / GTAW welders with their own special fitting as required. The hoses are available off the shelf in a standard range of lengths, 30 m, 25 m, 20 m, 15 m, 10 m and 5 m.

Conforming to British Standard BS EWN 599 Quality Standard, the Argon Gas Feed Hoses each have a temperature range from -30º up to 80ºC and a safety factor of three times working pressure 20 bar (300 psi).

HFT® advises welders to only use top quality hose assemblies to feed argon gas for top quality welds!


weld purging, back purging, argon feed hose, huntingdon fusion, hft Huntingdon fusion, argon hose, transporting argon, argon bottle, weld purging


Huntingdon Fusion Techniques HFT® have a Worldwide Exclusive Distributor network.

More information


This Press Release is Succesfully Published in Worldwide Magazines, by clicking the logo you can read the article: 

Logo Wire and Tube News

Logo Thomasnet Read the published article directly in the magazine ThomasNet
Logo ITA Read the published article directly in the magazine International Tube Association

Logo TubeFirst NEW

Read the published article directly in the magazine TubeFirst

Logo The Fabricator

Read the published article directly in the magazine The Fabricator

Logo Wire and Tube News

Read the published article directly in the magazine Wire and Tube News

Logo Tube News

Read the published article directly in the magazine Tube News

Logo Canadian Metal Working

Read the published article directly in the magazine Canadian Metalworking


Huntingdon Fusion Techniques HFT® are proud members of:

American Welding Society International Tube Association The Welding Institue Welding World

You are not allowed to use or copy any of this material or content without the written permission of Huntingdon Fusion Techniques HFT®, copyright protected. All rights belong to Huntingdon Fusion Techniques HFT® exclusively. Not for any reproduction without consent.