An accurate 'Eye' on your Money!
The World's 'first and only' super low cost, basic, no frills Weld Purge Monitor™ instrument measuring accurately down to 1 ppm.....!
'New' unique lifetime sensor, virtually no maintenance, no switching, no recording, no 'wet cell', no need to constantly calibrate, integrally mounted sensor, large alpha numeric display, small and lightweight, this ultra low cost instrument accurately measures down 1 parts per million.
PurgEye® a 'Family' Series of Weld Purge Monitors™.
Argweld® PurgEye® Weld Purge Monitor 300 Nano
Argweld® PurgEye® Weld Purge Monitor 300 Nano
The World's first purpose designed
Argweld® PurgEye® 300 'Nano' Weld Purge Monitor™
The Argweld® PurgEye® 300 'Nano' Weld Purge Monitor™ has been specifically designed as a very low cost, basic entry level version of the Argweld® PurgEye® 300 for indicating low oxygen levels in inert gas for weld purging down to 1 ppm.
With a large alpha-numeric display, the Argweld® PurgEye® 300 'Nano' measures very accurately from 1000 ppm down to 1 ppm.
A unique new low cost lifetime sensor is used which has very little maintenance requirement. The Argweld® PurgEye® 300 'Nano' avoids the disadvantages of monitors with 'wet cell' technology that have to be constantly calibrated and have sensors replaced.
Argweld® PurgEye® 300 'Nano' Weld Purge Monitors™ are available for immediate delivery.
Agweld® PurgEye® Weld Purge Monitor 300 Nano
Some Advantages and Key Features
The Argweld PurgEye® 300 'Nano' Weld Purge Monitor™ is small, lightweight and inexpensive.
Integrally mounted sensor to eliminate electrical interference.
Specifically developed for weld purging of critical stainless steel and titanium joints and others where data logging, alarms and welder control are not necessarily required.
Low repair, refurbishment and re-calibration costs.
Operation with manual welding, orbital welders, welding
enclosures, pipe welding and chamber welding.
Ideal for welding stainless steel in ultra clean applications.
Perfect for duplex steel and titanium welding.
No pump needed and no moving parts to fail.
110/220 VAC single phase operation.
Technical Data and Specification
Agweld® PurgEye® Weld Purge Monitor 300 Nano
Measuring Range down to 1 ppm (parts per million).
Large alpha-numeric display.
Instrument dimensions 120 x 150 x 60 mm.
Two minute warm up time.
Operating Voltage 115/230 volt single phase 50/60 Hz.
Switchable facility for readings in ppm or percentage.
Power consumption 18 w.
Use only weld purge hose leak tight quick disconnect fittings suitable for connecting 6 mm OD polyurethane tubing. Do not try to use other diameter tubing because it will not seal properly and will end up causing leaks.
Compare all Weld Purge Monitors in the PurgEye® Family Range
Argweld® PurgEye® 300 Nano and International Electrical Connections
Product Codes, Sizes, Weights, Dimensions and Shipping Information
Customs Tariff:
European Customs Tariff: 9026 1089
International Customs Tariff: 9026 80 6000
United States Customs Tariff: 9026 80 6000
Product Codes and Sizes:
Shipping dimensions 385 x 330 x 100 mm
Nett weight 2.2 kg
Gross Weight 2.7 kg
Volumetric weight 2.5 kg
Actual Instrument dimensions 120 x 150 x 60 mm
Actual Instrument weight 1.9 kg
Storage Carry Case dimensions 377 x 322 x 95 mm
The Argweld® PurgEye® 300 'Nano' Weld Purge Monitors™ are available for immediate delivery.
Argweld® PurgEye® 300 'Nano' Weld Purge Monitor™
| PART Nº | PRODUCT DESCRIPTION |
| API300N | Argweld® PurgEye® 300 Nano low cost Weld Purge Monitor™ for accurately measuring oxygen from 1,000 to 10 parts per million, complete with lifetime sensor and calibration certificate and suitable for operation from 115/230V single phase 50/60Hz, all delivered in a sturdy instrument case for storage and transportation. |
Accessories
| PART Nº | PRODUCT DESCRIPTION |
| APIS110 APIS109 APIS108 |
Vacuum extractor gas sampling hand pump Stainless steel gas sampling probe and connector assembly Gas sampling hose (6 mm OD x 2M long) |
Spares and Service
| PART Nº | PRODUCT DESCRIPTION |
| APIS07N APIS08N APIC05N |
Re-Calibration and Replacement Sensor Re-Calibration and Certification only Instrument case for the PurgEye® 300 Weld Purge Monitor™ |
Frequently Asked Questions
Agweld® PurgEye® Weld Purge Monitor 300 Nano
1.0 What sort of sensor is used in the Argweld® PurgEye® 300 'Nano' Weld Purge Monitor™.
The Argweld® PurgEye® 300 'Nano' Weld Purge Monitor™ uses a solid statesensor of a unique design. It is very much lower in cost than other sensors and has an indefinite life span.
2.0 What is the intended application for the Argweld® PurgEye® 300 'Nano' Weld Purge Monitor™?
The Argweld® PurgEye® 300 'Nano' Weld Purge Monitor™ is intended primarily for welding high quality joints made in titanium, duplex and other high spec stainless steels to prevent coking, oxidation and discolouration.
Where the inlet for the monitor sensor can be connected to a constant flow of exhausting weld purge gas.
When job specification demands accuracy in measuring oxygen levels in weld purge gas from 1000 ppm down to 10 ppm.
When controlling an external welding power supply or when alarms and data recording is not required.
3.0 Why isn't the Argweld® PurgEye® 300 'Nano' Weld Purge Monitor™ fitted with a pump?
Most welding applications have an adequate flow of weld purge gas that can be exhausted over the measuring sensor.
In the event that an adequate flow rate from the system being purged is not available, Huntingdon Fusion Techniques also manufactures a Weld Purge Monitor™ with a pump, called the Argweld® PurgEye® 500.
4.0 Is the Argweld® PurgEye® 300 'Nano' Weld Purge Monitor™ sensitive to electrical disturbances?
Each instrument has shielding to prevent most forms of interference.
Quality Control Test and Inspection criteria are designed to account for as many variables as possible.
It is extremely rare that electrical interference will affect the monitor.
5.0 My Company needs a Calibration Certificate once a year for all instruments. How do I obtain one?
Huntingdon Fusion Techniques has a re-calibration facility. Contact us or your nearest Distributor for pricing. Your instrument will be sent to us, we will re-calibrate it and return it with a Certificate within a few days.
PurgEye® 300 Nano
Items available as 'Downloads' for
Argweld® PurgEye® 300 'Nano' Weld Purge Monitors™
Leaflets and general sales material are available to everyone visiting our website.
Restricted access items are shown at the end of this Download section.
Argweld® PurgEye® 300 'Nano' Weld Purge Monitor™ A4 Leaflet
Argweld® PurgEye® 300 'Nano' Weld Purge Monitor™ Sales Flyer
Download comparison of all Weld Purge Monitors in the PurgEye® Family Range
Special Note: The items below are restricted and only available in our Secure Login section. This is mainly for the protection of our Exclusive Distributor network. Should you wish to receive an item mentioned below which is not active as a 'download' link on this page, please contact us or your nearest distributor.
