• 1
  • 2
  • 3
  • 4

Increase the Sensor Life significantly

S01W-PurgEye100-IP65-WeldPurgeMonitorYou may have noticed already that your spare or replacement PurgEye® 100 sensors are being shipped in new packaging.

This is a way to increase the sensor life significantly with this new storage method.

Spare sensors are packed at source inside a small sealed compartment to prevent oxygen from entering.

Once the tiny amount of oxygen inside the sealed volume has been consumed, a partial vacuum has been created just leaving the residual atmospheric nitrogen behind that protects the sensor and leaves it inert until the package is opened for use.

In this way, the average life has been raised close to 20 months or more.

PurgEye® 100 Weld Purge Monitor® not only have a "low sensor" warning signal, which normal oxygen monitors do not have, but you know that when your replacement sensor arrives that it will last much longer than any other oxygen monitors.


Pipe Purging Specialist and Weld Purging Expert

Huntingdon Fusion Techniques HFT®, established in 1975, is acknowledged as a Worldwide leader, designer and manufacturer in the fields of pipe weld purging systems, weld purge monitors® and other areas of weld purging technology.

Advanced engineering and technical expertise together with a fundamental scientific knowledge in the welding and weld purging market places, Huntingdon Fusion Techniques HFT design and manufacture an ever expanding range of tube, pipe and pipeline weld purging equipment, weld purge monitoring instruments and ancillary weld purging products.

Huntingdon Fusion Techniques HFT®, the recognised international pipe purging specialists and weld purging experts provide Worldwide customer support, cost effective solutions, qualified technical advice and quality weld purging products for achieving ultra clean welds produced in a well purged environment.

The recording and auditing capabilities of the HFT Family Series of Weld Purge Monitors® are considered vital to the tube and pipe sector where traceability is now becoming a critical issue. These Weld Purge Monitors® have been designed and manufactured specifically for welding as Oxygen Monitors are not accurate enough for weld purging. Equally the HFT Family Range of Tube, Pipe and Pipeline Inflatable Weld Purging Systems are considered absolutely vital to the welding industry.

For the weld purging of pipes or flat sheet and plate, whether using Water Soluble Weld Purge Film™, Weld Trailing Shields®, Weld Backing Tape™, Weld Purge Plugs™, Weld Purge Monitors® etc, Huntingdon Fusion Techniques HFT® as weld purging specialists have a product to satisfy your requirements.

If you need to close or plug all inlets and outlets in pipework fabrications or pipework systems so that weld purging and pressure testing can be successfully achieved, Huntingdon Fusion Techniques HFT® also has a range of products for these applications.

Leading pipework fabricators, sheet metal welding companies and pipeline manufacturers around the globe in construction, petrochemical, aerospace, power generation and process industries rely on these advanced products for the welding of stainless steel, titanium and other corrosion resistant metals as well as for plugging pipes and orifices made of all other tubular metal materials.

All our products manufactured to internationally recognised standards following fully accredited quality control procedures.

Pipe purging specialist and acknowledged weld purging expert, Huntingdon Fusion Techniques HFT, is a powerful international company with highly trained teams and specialists across the globe.

With offices and branches stretching across all 5 continents, Huntingdon Fusion Techniques HFT® are able to provide all tube and pipe purging systems, weld purge monitors® and weld purging accessories necessary for achieving that perfect clean weld using a dense ring purge of gas, fast purge methods and rapid purge times. Hence one of our most popular names QuickPurge®.

The trademarks and product names Argweld®, PurgEye®, PurgElite®, QuickPurge®, IntaCal®, RootGlo®, PurgeGate®, MultiStrike® Tungsten Electrodes and Weld Purge Monitors®, Weld Trailing Shields®, Flexible Welding Enclosures®, Weld Purge Film™ and Weld Purge Super Adhesive™, Weld Backing Tape™ and Weld Purge Tape™ and Weld Purge Plugs™, HFT Pipestoppers® are synonymous with Huntingdon Fusion Techniques HFT® for design, innovation and manufacture of advanced tube, pipe and pipeline weld purging products as well as weld purging accessories for sheet metal and platework manufactured from stainless steels and reactive alloys.

Huntingdon Fusion Techniques HFT® is proud to be the World's premier pioneering innovator, designer and manufacturer in the field of tube, pipeline and pipe weld purging equipment, weld purge monitoring® and weld purging technology.

Download Product Summary

Contact us - See our Worldwide Offices